How to Fix Worn-Out Iron Gates11/04/2013 Back To Blog
Among traditional residential gate openers, wood, steel and iron gates are the most common variants. Metal or iron add extra security to homes and they make the home look classy and stylish too. Metal or iron types are often distinguished by their sheer strength and classic ornamental features.
The best thing about metal gates is that they require low-maintenance, although they will require some form of upkeep to fully preserve their structural integrity as they are also susceptible to rust and constant exposure to rain and other elements.
Rust often forms when small scratches in the iron gates get exposed to oxygen, water and carbon dioxide, of which they disfigure or mark the metal form with a flaky, orange or reddish-brown tinge. Prompt iron gate repair can quickly resolve any issues associated with rust.
How to Do Rotten Gate Repair
To properly fix rust-infested iron, here are a number of steps that you can easily carry out, to ensure that your iron gates look good and last for a long, long time.
• The first step would be to scrub off loose rust by using a wire brush or steel brush. Make sure you remove as many rust flakes as possible. Next, apply a “navel jelly” on the remaining rust, by utilizing a disposable paint brush, and fully coat the rusty portion or surface with the jelly, but make sure you are wearing durable rubber gloves and safety glasses when doing this.
• Wait around for thirty minutes for the jelly to quickly dissolve the remaining rust, and then rinse it with cold water, to flush off the applied jelly. Never leave any traces of jelly on the gate after. The next wrought or ornamental gate repair technique would be to run medium-grade sandpaper over the affected spot and smooth the metal, to remove other undissolved rust particles. You could also moisten the steel gate with mineral spirits, to eliminate grease, soil or dust which could disrupt the paint that adheres on the gate. Dry it with a clean towel.
And according to gates Ramona experts, homeowners could also spray the iron gate with a coating of alkyd rust-inhibiting primer, as well as apply two separate finish coats of alkyd enamel paint, to prevent the growth of future rust and grime.